Area of use: for decorating OSB, MPP panels, plaster, concrete, plasterboard, and other mineral surfaces inside buildings.
Features: ready for use, toned, good adhesion to the surface, weak, specific smell, plastic, easy to apply and form, allows to obtain very different textures of the surface to be decorated, does not crack when applied up to 3mm.
Surface preparation: Surfaces must be clean, firm, dry and smooth. Materials that reduce adhesion - grease, grease, dust, glue, mortar residues, old peeling paint, clean chalky surfaces and prime with PRO PENETRATING, CONsolidating primer and putty with PRO UNIVERSAL putty. Before decorating, it is necessary to prime the surface with PRO PENETRATING, CONsolidating primer.
Decoration conditions: the temperature of the base and environment during work and drying must not be lower than +5 °C, the optimal working conditions are at a temperature of +20 °C and 65% relative air humidity. Do not work in direct sunlight or strong drafts. After reinforcing or plastering with mineral plaster, apply the decorative putty DEKOR.SOFT no earlier than 14 days later.
Decoration: apply the decorative putty on the surface with a metal spatula, brush or roller in a layer of 1-3 mm. Depending on the desired texture of the decorated surface, shape the applied decorative putty with spatulas (can also be toothed), specially designed paper, various brushes, decorating rollers, and other decorating tools. If the temperature during work is higher than +25 °C, moisten the surface to be formed with water using a sprayer. After forming the texture of the surface to be decorated, the putty is allowed to dry. The dried surface can be scrubbed with a scrubbing net, dust removed and covered with a matt or glossy primer - lacquer PRO.DEKOR (this way a stronger surface is obtained). The primer-varnish PRO.DEKOR can be tinted by adding the desired color building pigment PRO COLORANT or pigment pastes for coloring paint. Various colors and shades can be given to the surface with the primer-varnish prepared in this way. In order to obtain glossy effects, decorated surfaces can also be covered with decorative lacquers PRO.DEKOR EFFECT and DEKOR.PERLA.
Consumption: 1.8 - 5.5 kg/m² (depending on the desired structure of the decorated surface).
Drying time: at an air temperature of +20 °C and a relative air humidity of 65%: completely dry in 6 - 36 hours. (depending on the putty layer applied).
Cleaning tools: Rinse tools with water immediately after work.
Storage and transport conditions: at a temperature not lower than +5°C and not higher than +30°C in a tightly closed container. Protect from direct sunlight and freezing!
Technical data: binder - copolymer acrylic dispersion; density (comparative weight) – 1.8 kg/l; the diluent is water.
Environmental and occupational safety: Do not pour decorating putty into drains, watercourses or soil. Use skin and eye protection. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention. KEEP AWAY FROM CHILDREN!
