Field of application: for decoration of OSB panels, plaster, concrete, plasterboard and other mineral surfaces inside buildings.
Properties: ready to use, has a specific smell, adheres well to the surface. Depending on the thickness of the putty layer applied, the putty cracks when it dries, forming cracks of different sizes.
Surface preparation: the surface must be clean, firm, dry, free of greasy stains, primed with at least 2 layers of primer PRO.RETRO. The time interval between the priming layers must not be less than 5 hours.
Decoration conditions: the temperature of the substrate and the environment during work and drying is not lower than +10°C, if the temperature is lower, the "crack effect" will fail, and if the temperature is higher, the "crack" effect will be more pronounced.
Decoration: putty is applied to the surface to be decorated with a metal spatula in a layer not thinner than 2 mm. Applying a thicker layer of putty will make the cracks more pronounced and deeper. Depending on the desired texture of the decorated surface, shape the applied putty immediately with a metal decorating spatula. If the temperature during work is higher than +25°C, moisten the surface to be formed with water using a sprayer. After forming the texture of the surface to be decorated, the putty is allowed to dry. The dried surface must be scrubbed with a scrubbing net, dust removed and covered with a matte or glossy primer - varnish PRO.DEKOR. In order for the cracks to stand out, the cracks themselves do not need to be varnished. Primer-varnish PRO.DEKOR can be tinted by adding the desired color construction pigment COLORANT or coloring pastes for coloring paint.
Consumption: 4 - 18 kg/m² depending on the texture of the putty surface.
Drying time: at an air temperature of +20°C and a relative air humidity of 65%, depending on the thickness of the putty layer applied, the putty dries within 24-72 hours. Ventilate the room immediately after finishing the plastering work, without lowering the room temperature below +18°C. To speed up the cracking effect, it is recommended to place and turn on a household fan directed at the polished wall. possible after at least 6 hours. When ventilating the room, especially in cool weather, the "split" effect decreases.
Cleaning tools: Rinse tools with water immediately after work.
Storage and transport conditions: at a temperature not lower than +5°C and not higher than 30°C in a tightly closed container. Protect from direct sunlight and freezing!
Environmental and occupational safety: Do not pour putty into drains, watercourses or soil. Try not to inhale the vapors. Avoid contact with eyes, skin or clothing. If swallowed, call a poison control and information office or seek medical attention immediately. Keep out of reach of children. EUH208 - may cause an allergic reaction. Contains 3(2H)-Isothiazolone,5-chloro-2-methyl-,mixture with 2-methyl-3(2H)-isothiazolone, 1,2-Benzisothiazol-3(2H)-one and 2-Methyl-2H- isothiazol-3-one.
