Area of use: Intended for cleaning mold, fungi, algae and other dirt and plaque from mineral surfaces, tiles, slate. Surfaces cleaned with the cleaner are resistant to mold and algae. For outdoor and indoor work.
Features: FOR PROFESSIONAL USE ONLY. Weak, specific smell. Contains a biocidal product.
Working conditions: the temperature of the base and the environment during work and drying must not be lower than +5°C, the optimal working conditions are at a temperature of +20°C and 65% relative air humidity.
Application: Remove existing dirt from the surface as much as possible mechanically or with high-pressure cleaning equipment, allow the surfaces to dry well. Apply the BIO STOP cleaner on the surface with a brush or mechanized spray, well saturated. After application, protect from rain for at least 24 hours. Before performing other works (painting, plastering), leave the product on the surface for 1-4 days depending on the contamination, then wash off the product residues with clean water using a brush, and remove the remaining dirt mechanically.
Consumption: 50-150ml/m², depending on the absorbency of the base.
Cleaning tools: Wash tools with water immediately after work.
