Area of use: for priming wooden floors and other wooden surfaces before varnishing with one-component ortwo-component varnish for parquet PRO.PARKET,as well as PRO.BALDINIU LAKU.
Properties: reduces the cost of varnish, surface sprimed with this primer "shed" very little, have a weak, specificsmell.
Surface preparation: The surface to be primed must be clean, firm and dry. Remove adhesion-reducing substances - grease, oil and dust. It is necessary to pay attention to wooden surfaces made of ash,this wood has a tendency to change color (redden).
Working conditions: the temperature of the base andthe environment during work and drying must not belower than +5°C, the optimal working conditions are at a temperature of +20°C and 65% relative air humidity.
Work: to evenly cover the surface to be primed with a brush, avoiding the formation of clumps.After the primer dries, it is recommended to sand the primed surface using no. 150-200 scrubbing mesh.
If necessary, repeat the priming.
Consumption: 90 - 140 g/m² depending on surface absorbency.
Drying time: at an air temperature of +20°C and arelative air humidity of 65%: 2 - 4 hours.
Cleaning tools: Wash tools with water immediately after work.
Storage and transport conditions: at a temperature not lower than +5°C and not higher than +30°C in a tightly closed container. Protect from direct sunlight and freezing!
Environmental and occupational safety:
Do not pour the primer into drains, watercourses or soil. Use skin and eye protection. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor.
KEEP AWAY FROM CHILDREN!
