PREMIUM 7

Area of ​​use: intended for painting plastered surfaces, plaster, plasterboard, wallpaper, brickwork, concrete, various plates, other mineral surfaces in staircases, corridors, kitchens, work rooms and other rooms. For interior work.

Properties: contains no solvent, can be diluted with water, weak, specific smell, particularly good coverage, the paint film forms a small texture ("kerzuk") that hides surface defects, resistant to intensive washing.

Surface preparation: Surfaces to be painted must be clean, sound and dry. To remove adhesion-reducing substances - grease, grease, dust, glue, mortar residues, old peeling paint, chalky surfaces. Weak and porous surfaces should be primed with PRO primer UNIGRUNT, strong surfaces should be primed with PRO PENETRATING, CONsolidating primer. Putty the surfaces prepared in this way with PRO putty intended for interior works. Between the putty layers, if they will be scrubbed, prime with PRO PENETRATING, CONsolidating primer. Polished and sanded surfaces should be primed with primer LATEX-BAZĖ or PRO primer UNIGRUNT before painting.

Painting conditions: the substrate and ambient temperature during work and drying must not be lower than +5°C, the optimal painting conditions are at a temperature of +20°C and 65% relative air humidity. The new plaster can be painted no earlier than after 14 days. Do not work in direct sunlight or strong drafts.

Painting: It is recommended to use paints of one batch and one pigmentation for the area to be painted. In this way, different shades will be avoided. Mix the paint well, it can be diluted up to 10% with water. Paint in 2 layers with a brush, roller or sprayer.

Consumption: 6 - 8 m²/l (when painting in 2 layers).

Drying time: at +20°C temperature and 65% relative air humidity no stick after 1 hour, repaint after 5-7 hours. The paint film acquires full strength after at least 24 days.

Cleaning tools: Rinse with water immediately after work.

Color: White, various shades of color can be obtained using dyes. White (base A) - pastel shades are extracted, base B - medium intensity shades are extracted, base C - intense shades are extracted.

Storage and transport conditions: at a temperature not lower than +5°C and not higher than +30°C in a tightly closed container. Protect from freezing!

Environmental and occupational safety: Do not pour paint into drains, watercourses or soil. Avoid breathing vapor/aerosol. Avoid contact with eyes, skin or clothing. In case of insufficient ventilation, use suitable respiratory protection. If swallowed, call a poison control and information office or seek medical attention immediately. Keep out of reach of children. EUH208 - May cause an allergic reaction. Contains: 3(2H)isothiazolone, 5-chloro-2-methyl mixture with 2-methyl-3(2H)-isothiazolone, 1,2-benzisothiazol-3(2H)-one and 2,2',2'' - (Hexahydro-1,3,5-triazine-1,3,5-triyl)triethanol