UNIGRUNT

Field of application: to prime all filled surfaces before painting, also to reinforce weak surfaces. Internal and external use.

Properties: has especially small particles up to 0,05 micron. Reinforcing up to 300 micron weak surface. Deeply penetrates into surfaces and reinforce it, not forming a film, has a mild specific odour.

Surface preparation: surfaces must be clean, strong and dry. Remove all adhesion-reducing materials such as grease, oil, dust, glue residue, old paint, chalky surface.

Working conditions: surface and ambient temperature during work and drying must be at least +5°C; optimum conditions are at +20°C and 65% RH.

Use: mix the primer well before use, do not dilute. Prime evenly using a brush. If necessary repeat the priming. Apply the second layer only after the first one is completely dry.

Consumption:  50 – 200 g/m² depends on surface absorption.

Drying time: at +20°C temperature and 65% relative air humidity: 3 – 6 hours.

Cleaning of tools: wash the tools with water immediately after use.

Storage and carriage conditions: at least + 5ºC and not higher than +30°C in a tightly closed container. Protect from direct sunlight and freezing! 

Environmental and work safety: do not pour into drains, water reservoirs or soil. Avoid breathing vapor/aerosol. Avoid contact with eyes, skin or clothing. In case of insufficient ventilation, wear suitable respiratory protective equipment. If swallowed, immediately call a poison control center or doctor. Keep away from children.

Volatile organic compounds: 1.1.8h) VOC limit value 30g/l. The maximum in ready to use product no more than 29,95g/l.

Duration of validity:  18 months after manufacture date. See package.

In case of any questions, contact the specified phone number.